RoHS Mini210SBE

169.89KB

Mini210S BLACK EDITION. RoHS

Mini210S Black Edition is made exclusively for ARMWorks. Runs Android, Linux, WinCE. Accessories not included.

The Mini210S 11 by 11 cm size matches the Mini6410 and can mount the same P43 4.3” LCD. Keeping with the Sense and Simplicity FriendlyARM philosophy, the neat layout and small size is convenient for a host of applications. The Mini210S has 512 MBytes of DDR2 RAM with a full 32 bit data bus, 1 GByte of SLC NAND Flash (16 bit ECC), and the Samsung S5PV210 System On Chip at 1GHz clock speed. Contact ARMWorks for OEM versions and quantity pricing.

There is a Class D Amplifier, WM8960, that will drive a 1 watt 8 ohm speaker with ease. A mini HDMI connector can drive large displays and signage with graphics that range from static to video at 1080P. USB 2.0 supports cameras among other things, and a header provides for an 8x8 keyboard matrix. Power circuits provide for low power standby modes. The price/performance makes the Mini210S a great candidate for the Internet of Things, Kiosks, Smart Home, Scientific Instrumentation, Automotive applications, and any embedded requirements that will benefit from Internet connections.
The mature Superboot system lets you update or completely reprogram the system from a specially prepared SD card. No laptop or other equipment needed!

Mini210-S5PV210 Features

1GHz Samsung S5PV210 with PowerVR SGX540 graphics engine

512MB DDR2 RAM and 1GB NAND Flash

LCD/Touch Screen, HDMI, Audio support

MicroSD card, USB Host/OTG support

Ethernet, serial ports, GPIO, I2C, SPI, SDIO

Debian Jessie, Linux + Qtopia, WinCE 6.0, Android 2.3 & Android 4.0 support. (New Linux support being added all the time.)

System

CPU: 1 GHz Samsung S5PV210 with PowerVR SGX540 graphics engine (smooth 2D/3D, up to 1080p @ 30 fps decoding and encoding)

RAM: 512 MB DDR2 RAM, 32-bit bus

Flash: 1GB SLC NAND Flash

EEPROM: 256 Byte (I2C)

Ext. Memory: MicroSD card slot, Custom SDIO adapters.

RTC: Real-Time Clock with battery

Video & Audio

LCD Interface: 41-pin (1.0 mm) connector for FriendlyARM Displays, resistive and capacitive.

Monitor: Mini-HDMI (type C)

Camera: 20-pin (2.0 mm) CMOS Camera interface

Audio Output: 3.5 mm stereo jack, connector for a speaker (Class D Amp)

Audio Input: Condenser microphone on board

Network

Ethernet: RJ45 10/100M (DM9000)

Other IO

Serial Ports: 1x DB9 connector (RS232), total: 4x serial port connectors

USB: 1x USB-A Host 2.0, 1x Mini-USB Slave/OTG 2.0

Beeper: PWM buzzer

User Inputs: 4x push buttons and 1x ADC pot

User Output LEDs: 4x

Mobile Industry Processor Interface (MIPI): 24-pin (2.0 mm) header

SDIO Interface: 20-pin (2.0 mm) header, supports SD WiFi module, contains 1x SPI and 2x I2C

8×8 Keypad Interface: 20-pin (2.0 mm) header

GPIO Interface: 10-pin (2.0 mm) header, contains ADC, I2C, I2C, SPI, PWM, IO...

Debug: 10-pin JTAG (2.0 mm)

Mechanical

Dimensions: 110 × 110 mm

Temperature: 0°C to 70°C

Power: Regulated 5V (DC-Plug)

Weight: 98g

Hardware configuration:
CPU processor - SOC (System On Chip)
   Samsung S5PV210, based on the ARM Cortex ™-A8, running at 1GHz
   High-performance graphics engine built-in. PowerVR SGX540
   2D/3D graphics acceleration for supper smooth real-time graphics.
   Supports up to 1080p @ 30fps hardware decoding and smooth video playback, using MPEG4, H.263, H.264.
   Supports up to 1080p @ 30fps hardware encoding (Mpeg-2/VC1,) video input.

RAM
   Size: 512MB DDR2
    Full width 32 bit data bus, single-channel

FLASH memory
    SLC NAND Flash: 1GB (Standard)
   Supports SLC NAND Flash: 256M/512M/1GB (OEM optional)

LCD display
   LCD: 41Pin, 1.0mm pitch, same as Mini2440/Mini6410 displays.
   Touch pad support with one I2C and 3-way interrupts, 1 PWM output
    MiniHDMI HD connector (Type C)
    The LCD controller supports from 3.5 inches to 12.1 inches with screen resolution up to 1024x768.

Network (including wireless)
   10/100M Ethernet RJ45 interface (using DM9000AEP)

Standard interface resources
   DB9 serial RS232 five lines (shares four pin TTL level serial COM 0)
   Mini USB 2.0 Slave OTG interface
    USB through the 2.0mm interface header
   1 channel 3.5mm stereo audio output interface
   On board microphone
   External speaker interface (direct drive 8Ω 1W speaker)
   USB Host 2.0 interface
   Standard MicroSD card socket
   5V DC voltage input

On-board resources
   I2C-EEPROM chip (256byte), mainly used to test the I2C bus
   4 LED (green)
   4 Push buton switches
    One Pot on ADC conversion input 0 for test.
    1 PWM buzzer.
    On board battery backed real-time clock.

External expansion interface resources
   4 serial connectors: TTL level, 2.0mm spacing;
       CON1, CON2 six-wire serial port - includes 5V and Gnd.
       CON3, CON4 four-wire serial port - includes 5V and Gnd
    JTAG interface: 10pin 2.0mm pitch
   LCD interface: 41pin 1.0mm pitch Chip Block
   MIPI interface: 24pin 2.0mm pitch pin header
   SDIO interface: 20pin 2.0mm pitch
       Access for SD WiFi, SDIO includes SPI and I2C interfaces
   CMOS camera interface: 20pin 2.0mm pitch.
   8x8 matrix keyboard interface: 20pin 2.0mm pitch
   GPIO interface: 30pin, 2.0mm pitch
       Additional AD input, interrupts, I2S, I2C, SPI
        PWM port, digital input/output

Size: 110 x 110(mm)

Software support (see the detailed features described later)
   Superboot
   Linux-2.6.35 + Qtopia-2.2.0/Qt-4.4.3/Qt-4.7
   Android 2.3 (Linux-2.6.35 kernel)
   Android 4.0 (Linux-3.0 kernel, only to provide the programming file)
   WindowsCE 6.0r3