The Mini6410 ARM11 is a complete hardware solution with the Samsung S3C6410A ARM1176JZF-S core clocked at 533MHz (max 667Mhz). The full range of peripherals is provided on the 11x11 cm PCB. The Mini6410 has a vector processing unit (VPU) that can be used for graphics 2D and 3D acceleration and also used for hardware floating point in general applications.

Need to make an SD card for programming?  http://www.sasabremec.com/wordpress/arm11-my-friendlyarm/ultimate-guide-to-boot-friendlyarm-from-sd-card/

 

Mini6410 is the Mini6410 with 256 MBytes of RAM and 1 GByte of NAND plus power supply, cables, and DVD. Mini6410-OEM is just the board (hardware). $146.95

For the Accesory kit please visit  www.andahammer/ac641/

 

Mini6410-OEM with 256MB RAM and 1GByte NAND $138.95

 

Mini6410-35

For the Accesory kit please visit  www.andahammer/ac641/

Mini6410-OEM35 is a Mini6410 board plus a 3.5" LCD.  The LCD is 320x240 with integrated touch panel.

Mini6410-OEM35 with 256MB RAM and 1 GByte NAND plus 3.5" LCD $155.95

For the Accesory kit please visit  www.andahammer/ac641/

 

 

Mini6410-43 is a Mini6410-SDK plus a 4.3" LCD that mounts to the board with brass standoffs. The LCD is 480x272 with integrated touch panel.

Mini6410 with 256MB RAM and 1GByte NAND with 4.3" LCD $165.95

For the Accesory kit please visit  www.andahammer/ac641/

 

Mini6410-43

 

Mini6410-A70 is a Mini6410-SDK with 7" 800x480 LCD with touch panel.  Mini6410 with 256MB RAM, 1GByte NAND and 7" LCD $191.95 

For the Accesory kit please visit  www.andahammer/ac641/

Mini6410-A70

 

EZVGA for Mini6410 and Tiny6410  $18.95

VGA Adapter includes FFC and connector. Cable attaches just like the LCD.

The EZVGA has limited supply and is being replaced by a FriendlyARM 6410 variant of the FriendlyARMVGA - LCD2VGA

contact for availability 

 

Cable Kit for Mini6410