OEM Version of the Mini35. Delete SDK materials. No cables, power supply, or DVD. Just the Hardware. The Mini35 is a FriendlyARM Mini2440 (see specs on Mini2440 page) 405 MHz ARM9 with a 3.5" LCD 320x240 and integral touch screen. There is about nine inches of ribbon cable folded under the display and it can be mounted remotely from the processor board. Other lengths and custom cables are available up to 52cm. Superboot2440 allows the units to program their own NAND from files on an SD card. Note: OEM purchase orders require a 70% deposit.
One GByte NAND Flash Option
Mini2440 S3C2440 board (Preloaded with Linux)
Sony LCD: 3.5", 240x320, with touch panel and mounting hardware.
|CPU||Samsung S3C2440A 405MHz |
|SDRAM||64MByte SDRAM32bit Data Bus 100MHz Clock |
|Flash||256/1024 MByte Nand Flash (Options)2MByte Nor Flash, BIOS installed|
|LCD ||Integrated 4 wire resistive touch screen interface3.5 inch Sony 256K color 240x320 TFT |
|Interface and Resource||10/100M Ethernet RJ-45(DM9000) 3 x Serial Ports(1 RS232 with CTS and RTS)1 x USB Host1 x USB Slave Type B1 x SD Card Interface 2 IIC channels 2 SPI channels Stereo audio out, Microphone in, 1 mic on board10-Pin JTAG4 USER LEDs6 USER button also go to to 8 pin interface connector.PWM Beeper POT can be used for A/D converter test or ? AT24C08 NVRAM for I2C test or saving params. 20-Pin CNOS Camera InterfaceBattery for RTCPower In(5V), with switch and LED |
|Oscillator Freq.||12MHz |
|Expansion Interface||34-Pin 2.0mm GPIO 40-Pin 2.0mm System Bus8 pin interrupt and user button connector20 pin CMOS camera interface connector |
|OS Support||Linux 2.6.2, 2.6.32 Windows CE.Net 5.0/6.0uC/OS-II |
|Form Factor||100 x 100(mm)|