1GHz CPU/ 1 GB Flash(16bit ECC)/ 512MB RAM/ HDMI/ USB 2.0/ 4.3" Cap Touch LCD/Android 4.0.

 

The capacitive touch display uses the same reliable LCD as the resistive touch system, with a laminated capacitive touch panel. The Mini210S is a smaller simpler Mini210. The 11 by 11 cm size matches the Mini6410 and can mount the same H43 4.3” LCD form factor. Keeping with the Sense and Simplicity FriendlyARM philosophy, the neat layout and small size is convenient for a host of applications. The Mini210S has a very useful 512 MBytes of DDR2 RAM with full 32 bit data bus, 1 GBytes of SLC NAND Flash (16 bit ECC), and the Samsung S5PV210 System On Chip at 1 GHz clock speed.  Contact ARMWorks for OEM versions and quantity pricing.

There is a Class D Amplifier, WM8960, that will drive a 1 watt 8 ohm speaker with ease. A mini HDMI connector can drive large displays and signage with static graphics, or video at 1080P. USB 2.0 can support cameras, and a header provides for an 8x8 keyboard matrix. Power circuits provide for low power standby modes. The price/performance makes the Mini210S a great candidate for the Internet of Things, Kiosks, Smart Home, Scientific Instrumentation, Automotive applications, and any embedded requirements that will benefit from Internet connections.
The mature Superboot system lets you update or completely reprogram the system from a specially prepared SD card. No laptop or other equipment needed!

 

Kit includes Mini210S, H431C Cap Touch LCD, power supply, development cables (serial, USB, Ethernet). DVD ISO files are downloaded.

Hardware configuration:
CPU processor - SOC (System On Chip)
    Samsung S5PV210, based on the ARM Cortex ™-A8, running at 1GHz
    High-performance graphics engine built-in. PowerVR SGX540
    2D/3D graphics acceleration for super smooth real-time graphics.
    Supports up to 1080p @ 30fps hardware decoding and smooth video playback, using MPEG4, H.263, H.264.
    Supports up to 1080p @ 30fps the hardware encoding (Mpeg-2/VC1,) video input.

DDR2 RAM memory
    Size: 512MB
    32bit data bus, single-channel

FLASH memory
    SLC NAND Flash: 1GB (Standard)
    Supports SLC NAND Flash: 256M/512M/1GB (quantities optional)

LCD display
    LCD: 41Pin, 1.0mm pitch, same as Mini2440/Mini6410 displays.
    Touch pad support with one I2C and 3-way interrupts, 1 PWM output
    miniHDMI HD connector (Type C)
    LCD support from 3.5 inches to 12.1 inches. Screen resolution up to 1024x768.

Network (including wireless)
    10/100M Ethernet RJ45 interface (using DM9000AEP)

Standard interface resources
    DB9 serial RS232 five lines (another four TTL level serial)
    Mini USB 2.0 Slave OTG interface:
    USB through the 2.0mm interface header
    1 channel 3.5mm stereo audio output interface
    On board microphone input
    External speaker interface (direct drive 8Ω 1W speaker)
    USB Host 2.0 interface
    Standard TF card socket
    5V DC voltage input: The Interface Model for DC-23B

On-board resources
    I2C-EEPROM chip (256byte), mainly used to test the I2C bus
    4 LED (green)
    4 Celi key (interrupt resources pin)
    One Pot on ADC conversion input 0 for test.
        1 PWM buzzer.
        On board battery backed real-time clock.

External expansion interface resources
    4 serial connectors: TTL level, 2.0mm spacing;
        CON1, CON2 five-wire serial port
        CON3, CON4 three-wire serial port.
    JTAG interface: 10pin 2.0mm pitch
    LCD  interface: 41pin 1.0mm pitch Chip Block
    MIPI  interface: 24pin 2.0mm pitch pin header
    SDIO interface: 20pin 2.0mm pitch
        Access for SD WiFi, SDIO includes SPI and I2C interfaces
    CMOS camera interface: 20pin 2.0mm pitch, can access two cameras.
    8x8 matrix keyboard interface: 20pin 2.0mm pitch
    GPIO interface: 30pin, 2.0mm pitch
        Additional AD input, interrupts, I2S, I2C, SPI
         PWM port, digital input/output

Size: 110 x 110(mm)

Software support (see the detailed features described later)
    Superboot
    Linux-2.6.35 + Qtopia-2.2.0/Qt-4.4.3/Qt-4.7
    Android 2.3 (Linux-2.6.35 kernel)
    Android 4.0 (Linux-3.0 kernel, only to provide the programming file)
    WindowsCE 6.0 

 

 

Linux System Features

A complete Linux system to support the three Qt graphics systems (Qtopia, QT4, QT/E) with support for HDMI output (including audio and video).

Cross-compiler   arm-linux-gcc-4.5.1-v6,-vfp
The Mini6410 universal kernel will automatically detect the armv7 instruction set and support the hardware floating-point.
Superboot-210
    TF card offline fast programming
    Superboot specifically customized for enterprise users, not open source
    TF card off-line programming YAFFS2 format image files
    LCD display hardware configuration information and a programming progress bar.
    Automatic identification MMC / NAND start
Programming tool for the SD-Flasher supports WindowsXP/Vist/Windows7
Linux kernel  -- Version: Linux-2.6.35.7
Perfect BSP
YAFFS2/CRAMFS/NFS/UBIFS/NFS/FAT32 file system formats
Source code provided for:
    Kernel with Watchdog driver
    Samsung original BSP RTC driver
    Samsung original BSP 4 LED driver
    FriendlyArm 8 user key driver
    FriendlyArm, Mini210S only use four of them
SPI driver
Source code, the kernel's built, unauthenticated
The I2C-the EEPROM driver
    Samsung original BSP PWM control buzzer driver
    Friendly arm ADC driver (channel: AIN0)
    Friendly arm CPU touch screen controller driver
    Samsung original BSP (did not use, see the first-line touch) First-line precision touch driver
    Friendly arm LCD backlight driver to support 127 adjustable levels
    Friendly arm LCD driver (4.3 ", 5", 7 ", 8", 10 "): support for rotation
    Friendly arm boot parameter parameters to select LCD "lcd ="  
    USB Host Driver: Supports USB, Bluetooth
    Samsung original BSP USB Device Driver: support for the USB the ADB
    Samsung original BSP SD card driver
    Samsung original BSP Four serial port driver
    Samsung original BSP Onboard the SD WiFi drive (Marvell8686)
Driver module, a friendly arm transplant
USB WiFi driver: kernel comes with support is not very good for certain types of card
Provide the source code, the kernel comes with the default system does not contain this driver (not used)
USB WiFi driver: USB wireless network card can support more models, more sophisticated
Driver module, the default system already contains the driver (not enabled)
Audio driver (The WM8960: Support recording and playback, the ALSA interface, support for the Class D Power Amplifier)
    Friendly arm transplant Ethernet (the DM9000)
    Friendly arm transplant FIMC drive
    Samsung original BSP JPEG drive
    Samsung original BSP MFC multimedia drive
    Samsung original BSP CMOS camera driver (OV8650)
    Friendly arm transplant HDMI drivers
    Samsung original BSP 3D acceleration
    Samsung original BSP 2D acceleration
    Samsung original BSP USB to serial port driver
    kernel has 3G driver: FriendlyARM USB to serial port driver
    FriendlyARM adapted Graphics systems: (With run-time support to switch Qt/E and Qt4)
    Qtopia-2.2.0 Full source code is divided into two versions for x86 and ARM

    Qt/Embedded-4.7.0 Source code for ARM version.
    Qt-Extended-4.4.4  Mobile version of Qtopia called Qtopia4, ARM platform source included

Practical test procedures. Source code is not included for these FriendlyARM graphic interface programs.

    Graphical interface dialer 3G
    Support for more than 100 kinds of USB card, covering WCDMA, CDMA2000, TD-SCDMA network a variety of formats
    Support boot with automatically 3G dial-up
    GPRS SMS with serial or USB port send and receive text messages

    ADC testing procedures
    Dynamic display of the ADC conversion results
    LED Test
    Buttons test
    I2C test
    EEPROM read and write, and very easy to use
   LCD test
   Ping Test
   Graphical interface of the Ping test, support the permanent Ping and temporary Ping
   USB camera testing
   Support dynamic preview and take pictures, and support universal USB camera driver
   CMOS camera test
   Support for dynamic preview also photographed
   Recording
   ALSA interface recording
   Web browser
   Watchdog test, Turned on, only to feed the dog in order to ensure that the system does not restart
   Graphical interface to the network settings
   Can set the IP address, DNS, gateway and other network parameters, and save the settings
   Backlight control
   128 backlight adjustable
   Can set the backlight to turn off time
   Language settings
   Support Chinese, English and Japanese language settings
   Readily write, Mainly used for the testing of the accuracy of the touch pen
   MMC / SD card and USB flash drives automatically mounting and unmounting
   Mounted after the USB or SD card icon in the taskbar
   Qt-4.4.3 switch
   Freely in the run-time switch to Qtopia-2.2.0 do not have to restart
   Qt-4.7.0 switch
   Freely in the run-time switch to Qtopia-2.2.0 do not have to restart
   SMPlayer
   Qt4 version of Mplayer player Dingdingyouming is very powerful
   Independent HDMI output characteristics
   Apply to the Internet TV, smart TV, game consoles and other programs
   Details of this page are described later in
   This column reserved

Android system resource characteristics
Smooth running Android 2.3, support 2D/3D acceleration, 1080p HD video, HDMI output (with audio and video)
Cross-compiler
arm - linux - gcc-4.5.1-v6,-vfp
And the Mini6410 universal, compile the kernel will automatically detect armv7 instruction set to support the hard-floating-point operations, exclusive
Superboot210
Support TF card offline fast programming (according to the configuration file), fast (1.8M / s)
Superboot specifically customized for enterprise users, not open source
Support TF card off-line programming YAFFS2 format image files
Support LCD display hardware configuration information, the programming progress indication
Support for automatic identification MMC / NAND start
SLC and MLC NAND Flash
Programming tool for the SD-Flasher support WindowsXP/Vist/Windows7
Android kernel
Version: Linux-2.6.35
Perfect BSP
Support YAFFS2/CRAMFS/NFS/UBIFS/NFS/FAT32 such as file system format
Provide the source code, the kernel comes
Watchdog driver
Provide the source code, Samsung original BSP brought
RTC driver
Provide the source code, Samsung original BSP brought
4 LED driver
Provide the source code, a friendly arm to add
8 user key driver
Provide the source code, add a friendly arm, Mini210s only use four of them
SPI driver
Source code, the kernel's built, unauthenticated
The I2C-the EEPROM driver
Provide the source code, Samsung original BSP brought
PWM control buzzer driver
Provide the source code, a friendly arm to add
ADC driver (channel: AIN0)
Provide the source code, a friendly arm to add
CPU itself brought touch screen controller driver
Provide the source code, Samsung brought the original BSP (did not use, see the first-line touch)
First-line precision touch driver
Provide the source code, a friendly arm to add
LCD backlight driver to support 127 adjustable
Provide the source code, a friendly arm to add
LCD driver (4.3 ", 5", 7 ", 8", 10 "): support for rotation
Provide the source code, friendly arm transplant, according to the startup parameters "lcd =" to identify, share the same kernel
USB Host Driver: Supports USB, Bluetooth
Provide the source code, Samsung original BSP brought
USB Device Driver: support for the USB the ADB
Provide the source code, Samsung original BSP brought
SD card driver
Provide the source code, Samsung original BSP brought
Four serial port driver
Provide the source code, Samsung original BSP brought
Onboard the SD WiFi drive (Marvell8686)
Driver module, a friendly arm transplant
USB WiFi driver: kernel comes with support is not very good for certain types of card
Provide the source code, the kernel comes with the default system does not contain this driver (not used)
USB WiFi driver: USB wireless network card can support more models, more sophisticated
Driver module, the default system already contains the driver (not enabled)
Audio driver (The WM8960: Support recording and playback, the ALSA interface, support for the Class D Power Amplifier)
Driver module, add the friendly arm transplant
Ethernet (the DM9000)
Provide the source code, a friendly arm transplant
FIMC drive
Provide the source code, Samsung original BSP brought
JPEG drive
Provide the source code, Samsung original BSP brought
MFC multimedia drive
Provide the source code, Samsung original BSP brought
CMOS camera driver (OV8650)
Driver module, add the friendly arm transplant
HDMI drivers
Provide the source code, Samsung original BSP brought
3D acceleration
Provide the source code, Samsung original BSP brought
Note: The Samsung does not provide OpenGL and OpenVG source code, the development board are missing
2D acceleration
Provide the source code, Samsung original BSP brought
Note: The Samsung does not provide OpenGL and OpenVG source code, the development board are missing
USB to serial port driver:
Provide the source code, the kernel comes
3G driver: add a friendly arm, is in fact a USB to serial port driver
Provide the source code, a friendly arm transplant
Independent HDMI output characteristics
Apply to the Internet TV, smart TV, game consoles and other programs
Details of this page are described later in
This column reserved
 
 
WindowsCE 6.0

Exclusive support WindowsCE6 platform HDMI and LCD simultaneous output, including audio and video
Development environment
Visual Studio 2005

Superboot210
Brush features
Support directly from the FAT format SD card to read the various programming documents: a custom file path
Support TF / SD card off-line programming fast the the WindowsCE cores (NK.bin): independent programming
SD card support offline updating the boot LOGO: just a normal bmp file
Offline programming the Linux / Androd, / the Ubuntu kernel and file system image support SD card: can be independently programmed to support YAFFS2/UBI format
Support for MLC / SLC NAND Flash
Superboot specifically customized for enterprise users, not open source
Auxiliary features
Support LCD display hardware configuration information, the programming progress indication
Support automatic recognition of RAM, flash type, and output display on the LCD and serial
Support automatic recognition LCD Model: limited to the LCD backplane with front-line control
Support the programming process for LED or beeper Tip: apply to the veneer-free screen
Startup characteristics
Support for automatic identification of the SD / NAND boot
Support directly from the SD card to start WindowsCE
Support for MLC / SLC NAND Flash
Other
Programming tool for the SD-Flasher support WindowsXP/Vist/Windows7
The development of exclusive features for you to customize
Characteristics of WindowsCE the BSP
Version: WindowsCE 6.0 R3

General characteristics
RTC: You can power-down to maintain a real-time clock
Watchdog: Support
NAND Flash: MLC and SLC
LCD driver: support true color LCD of 480x272, 640x480, 800x480, 800x600, 1024x768, etc. Resolution of various sizes
Touchscreen driver: support for first-line touch
Backlight Driver: support for first-line control of the backlight adjustment, up to 128, the system default of 30 seconds turn off the backlight automatically (user can adjust the closing time)
Serial port driver: support efforts to improve the four serial port driver can be directly connected to GPRS Modem, RS485 adapter and serial devices
NIC driver: DM9000AEP 10/100M compatible
Audio driver: The WM8960 I2S interface, playback and recording
SD card driver: support SDHC (high capacity card)
USB Host Driver: currently only support USB 1.1, can be accessed by the thumb drive, mouse and keyboard and other peripherals Plug and Play
LED driver: Support onboard four GPIO control LEDs, custom functions
The key driver: support on-board eight interrupt key can be automatically defined functions
PWM drive: support on-board PWM control buzzer output frequency can be adjusted freely
ADC Driver: Supports onboard adjustable resistance ADC conversion
SPI driver: comes with original, untested
I2C driver: Support onboard WM8960 audio chip control
HDMI driver: synchronous output support for HDMI and LCD, and includes audio signals

Practical test procedures
LED-Test: LED testing

Buttons: the key test
ADC testing: test the ADC conversion in the system / Windows directory
the watchdog: test to see the dream dog function
Backlight: Test backlight control
PWM-Buzzer: Test PWM control buzzer output
HDMI Setting: set the HDMI output mode, mainly for the setting of the LCD output
Recorder is: recording test
SerialPort: serial Assistant
The AutoRun Setting: set to start automatically, and is ideal for corporate customers special program to start automatically
iMac: set up the development board's MAC address
Independent HDMI output characteristics
Apply to the Internet TV, smart TV, game consoles and other programs
Details of this page are described later in
This column reserved


ReggieUK has provided a away to get Google Play and some video players up and running. Thanks Reggie!

installing Gapps, Google Play on the Mini210S Android 4

The mini210S doesn't have google play or the other google apps (gapps) installed, without it you can't access google play (used to be known as android market), there are chinese app. market programs, unfortunately I cannot read chinese (maybe one day?), so getting google play on there is useful for any Western Mini210S developers, easy access to a trusted application source :) 

Looking at all of the tutorials and rooting tools, apps, downloads, it's pretty easy to get confused as to exactly what to do, it turns out that getting the 'gapps' package installed on your mini210S is incredibly simple!!

1. download gapps-ics-20120429-signed.apk or .zip from somewhere on the net, google it, cyanogen keep gapps. up to date.

2. Unpack it somewhere (if it's an apk you should still be able to open it with winrar or 7zip etc.) and copy the system folder into a folder called Download on a fat partition on a microSD card, it's about 50MB so pretty much any card will do.

3. connect to your Mini210S via serial console, I use linux and a terminal console app. called minicom, set at 115200 baud, 8N1, you can use con1 with a usb to serial adapter, pin 6 is on the left!! please refer to the UART section of the user manual.

4. Now you've connected to the mini210S we can copy the files we put on the SD card to where they need to be, in your terminal app. do the following and hit enter:

cp -r /sdcard/Download/system/* /system/

5. reboot the mini210S and use google play.

If you go into your apps menu, you should now see google play is present, it's a shopping bag with an arrow head pointing right!  Once you've found it, click on it, you should now be presented with a bunch of options like logging in with a google account or signing up. I already had an account, so I used that, I clicked through the login screens adding my google email and password, at that point it tried to connect but seemed to fail, so I rebooted, tried again, seemed to fail, rebooted and it worked, you may or may not need to clear the cache for google play in the apps manager but it seems like rebooting a couple of times is enough.

If you had previously installed flash player, you may need to uninstall it and reinstall it from google play, no idea why it messes with it but after gapps is installed, the iplayer website complains that I needed flash installing.

To get Flash player working, check the blog herre.

 

1-9 144.95
10-24 142.95
25-49 141.00
50+ 139.95
Qty